AV-5
Series 5 Litre single cylinder Volumetric
liquid and cream filling machine
Quick
stats:
- Bench
model
- Can
be conveyor mounted (75Kgs approx)
- Air
operated (we can supply air compressor if required)
- 10-15
units per minute (guide only)
- Suitable
for food and pharmaceutical use
- Fully
pneumatic
- Totally
speed adjustable
- 400kpa
(60psi) pressure requirement
- 6CFM
air consumption
- Quick
change over of product and parts
- Various
nozzles, cylinders, intakes etc.
- Fully
volume adjustable
- 500mls
to 5000mls fill range, single shot
- Can
have special parts fitted to run 60mls to 600mls
- All
316 stainless steel contact parts
- 304
stainless steel and aluminum construction
- Flameproof
- Standard
with bottom up fill
- Standard
with positive shut off nozzles
- Adjustable
volume while running
- Positive
acting spool valve operation
- Hot
or cold fill
- Can
do multiple shot fills for 10, 15, 20, 25Ltr fills
- Fast
change over of containers
This
machine would normally be used with:
AC-1,
BM-SAL, CP-SAL-W,
CV-6, AAC-1
Full
write up:
The
Asset AV-5 pneumatic volumetric filling machine is a versatile and accurate liquid
filling machine.
It
is self priming from a tank or drum and is ideal for handling any free flowing
products such as shampoo, detergents, mayonnaise, oils, paints etc.
Fitted
with an air operated spool valve it can handle products with suspended solids
up to 95 deg such as fruit and vegetable pulp mixes and sauces. This valve is
suitable for product feed from floor or elevated tanks.
Standard
features:
- Full
5 Ltr cylinder delivers products in one smooth stroke
- Bench
model
- Heavy
duty drive system
- Integral
304 grade stainless steel base and cladding mounted on a stainless steel trolley
- Bottom
up fill nozzle assembly
- Wet
parts made from 316 grade stainless steel and food grade engineering plastics
- Piston
fitted with O-ring energised Teflon/HDPE glide ring seal
- Quick
connect Triclover product inlet/outlet fittings
- All
pneumatic flameproof operation suitable for use with flammable products
- Individual
fill and recharge speed controls
- No
tools needed for basic strip and reassemble, takes only minutes
- Positive
shut off nozzle standard
- Fitted
with filter regulator unit
- Simple
construction allows for unskilled operation and cleaning
- Filling
accuracy +/- 0.5 to 1%
- Sturdy
low maintenance construction
- Quick
container size changeover
- pneumatic
timer control unit
- High
quality air cylinder drive
- Dimensions
1200 x 500 x 1000
More
pics coming soon...