CAB-AU Auto Print Apply Applicator

AUTO PRINT APPLY


CAB
MODEL
CAB-A+
ITEM CODE
CAB-AU
NOTE
Available with either wax, resin, or combined black thermal transfer ribbon
Surface
Varnish & Laminates can cause issues
  • CAB-A6-Thermal-Label-Over-Printer-2
  • CAB-A-Automatic-Thermal-Transfer-Printer-1
  • CAB-A-Automatic-Thermal-Transfer-Printer-2
  • CAB-A6-Thermal-Label-Over-Printer-2
  • CAB-A-Automatic-Thermal-Transfer-Printer-1
  • CAB-A-Automatic-Thermal-Transfer-Printer-2

Bolt On
Pneumatic
Requires Air Compressor
Electric
Requires Power 10AMP
Medium Noise
Quick Stats
  • Suitable for flat surfaces
  • Air operated - 0.5mPa (5 bar)
  • Label width - 25 - 176mm
  • Label height - 80 - 200mm
  • Electro/pneumatic controlled
  • No tools required for setting adjustment
Features
  • Supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator can be adapted to different label material and sizes.
  • The operating pressure for the cylinder is reduced in comparison to the main pressure of the applicator. So the risk of injury is reduced as far as possible.
  • To avoid contamination within the vacuum channels they are cleaned by the air pressure impulse at the end of each application.
  • For operation in a networked system the 15-pin or 25-pin applicator's PLC (programmable logic control) interface with potential free inputs and outputs can be use.
Options
  • Stamp on - The label is pressed directly onto the product
  • Blow on - The pad moves to a pre-adjusted position approximately 10mm away from the product. The label is blown onto the product by an air stream.
  • Stamp on - The label is pressed directly onto the product
More

Print Apply setups can also be achieved with an continuous ink jet coder such as the IJC-PB Ink Jet Coder, the IJC-RX Ink Jet Coder,

This machine would normally be used with

PA-TM12 Portable Air Compressor

AIR COMPRESSOR SINGLE PHASE ELECTRIC PORTABLE

Read more

CV-6-B Rubber Belt Conveyor

RUBBER BELT CONVEYOR

Read more

INS-AUJR Bench Top Induction Sealer

SEMI-AUTOMATIC BENCH TOP INDUCTION SEALER

Read more

3M-88a Matic Side Drive Case Sealer

CASE SEALER / BOX TAPER

Read more

IJC-RX CIJ Ink Jet Coder

SMALL CHARACTER CIJ CONTINUOUS INK JET PRINTER

Read more

AV-3 Single Head Filler

SINGLE HEAD VOLUMETRIC LIQUID, CREAM, PASTE & OTHER WET-STATE FILLER

Read more

Shop parts & consumables

100mm x 350mtr Black Resin Thermal Transfer Ribbon – Premium (Ricoh B110C)

View Product

150mm x 350mtr Black Resin Thermal Transfer Ribbon – Premium (Ricoh B110C)

View Product

25mm x 350mtr Black Resin Thermal Transfer Ribbon

View Product

Shop Packaging & Materials
Coming Soon

PART NAME

Coming Soon

Copyright 2018 by Packserv Pty Ltd. All rights reserved.