CP-SAL-W Wrap Labeller

• Round and near-round containers
• Bench model (20Kgs approx)
• No problem with clear and opaque labels
• Requires air and power (single phase)
• 10-15 units per minute (guide only)
• Suitable for food and pharmaceutical use
• Quick change over of container or parts
• Stainless steel and aluminum construction
• Adjustable label position while running
• Label height max 150mm
• Applies front and back labels, in short two stop process
• Dimensions: 360 x 720x 500mm
• Can connect to the Datamax printer for print-apply
• Max' Roll Diameter 300mm - 76 Core
• Label Height Max' 150mm
• Label Length Min 15mm - 220mm
• Throughput up 20 per minute
• Foot Print Dim' W330 x L600
• Overall Dim' W360 x L720 x H500 - 35kg
• Power Requirements 240V 10Amp
• Gross Crate Dim' W430 x L780 x H430 - 50Kg
• Labels:
• On a roll
• Self adhesive
• Die cut & weeded
• Left hand edge leading (in most cases)
• Front & back on same roll preferable
• Max roll diameter: 300mm
• Core diameters: 38mm and 76mm (pref)
• Max height: 180mm
• Min height: 10mm
• Max width: 230mm
• Min width: 20mm
• Click link below for detailed diagram of label orientation
• LABEL UNWIND (DIRECTION) CHART
• We often find that one particular labeller will not necessarily be better than another based purely on its brand, size or cost, and as such when installing a labelling solution we generally will bring several different units to make sure you get the right machine for the job, if this is not possible we normally request that a sample of your container and a roll of your labels be sent to us to run a trial, this is a free of charge service that we offer to help you make sure you get the equipment you need.

• Label Waste removal - Incorporating a backing paper take up roller, all the waste is accumulated in a tidy roll for easy disposal
• No fire or slip hazard in the vicinity of the operators feet like similar machines
• Easy to set up - within a couple of minutes a new job can be set up and running, increasing productivity immediately
• Simple to operate - almost no skill or training is required to obtain an excellent result
• Robust, heavy duty construction - The machine is designed for years of trouble free and maintenance free productivity
• No lubrication or awkward adjustments are required
• Fully Adjustable - Tool-less adjustment accommodating a wide range of different container sizes including extra long and large containers

• Printer output - For the activation of an external Thermal Printer - for printing; Use By; Batch Codes or Barcodes
• Registration Labelling - Places labels relative to seams of cans & registration marks on containers
• Over and Spot Labelling - detecting an existing label and adding a new label is straight forward and uncomplicated

Compact-a-Syringe is a portable semi automatic Labeller. It is designed to apply one or two labels to round - parallel sided containers. If required a clever orientation device allows Over Labelling or Registration Labelling. It is economically priced, industrially built and provides unparalleled productivity without compromising quality. Built for ease of use and long term reliability the Compact-a-Syringe is as tough as it looks, made from Stainless Steel and Aluminum. It is very simple to operate and set up and unlike other semi automatic Labellers it rewinds the backing paper as you work - removing potential fire and safety hazards. All die cut labels, whether they are clear or opaque, are able to be applied by Compact-a-Syringe.
Example Applications:
Wine Bottle Labelling - Front & Back, full wrap or Over-Label pre-labelled bottles Aerosol Can Labeller - with label/s oriented to a seam, full or partial wrap Plastic or Glass Bottle Applicator - Front & Back, full wrap or add spot labels to pre-labelled bottles (opt) Poison or Embossed Bottles - One or Two labels oriented relative to embossing (opt) Plastic Bottles Applicator - One or Two labels oriented relative to the seam of plastic bottles - great for applying clear labels for the "NO Label Look" (opt) Syringes and Vials - Front & Back, or full wrap labels PROCESS As "semi automatic" implies, an operator simply places a container on the machine's rollers, pulls down the operating handle and Compact-a-Wr@p does the rest. When labelling is complete, the container stops rotating and the operator removes the perfectly labelled product and repeats the cycle.