CAB-AUT Auto Print Apply Tamp Applicator

THERMAL TRANSFER AUTO TAMP PRINT APPLY


CAB
MODEL
CAB-A+
ITEM CODE
CAB-AUT
NOTE
Available with either wax, resin, or combined black thermal transfer ribbon
Surface
Varnish & Laminates can cause issues
  • PA-CAB-AUT-CAB-THERMAL-TRANSFER-AUTO-TAMP-PRINT-APPLY-2.jpg
  • PA-CAB-AUT-CAB-THERMAL-TRANSFER-AUTO-TAMP-PRINT-APPLY-3.jpg
  • PA-CAB-AUT-CAB-THERMAL-TRANSFER-AUTO-TAMP-PRINT-APPLY-6.jpg
  • PA-CAB-AUT-CAB-THERMAL-TRANSFER-AUTO-TAMP-PRINT-APPLY-2.jpg
  • PA-CAB-AUT-CAB-THERMAL-TRANSFER-AUTO-TAMP-PRINT-APPLY-3.jpg
  • PA-CAB-AUT-CAB-THERMAL-TRANSFER-AUTO-TAMP-PRINT-APPLY-6.jpg

Bolt On
Pneumatic
Requires Air Compressor
Electric
Requires Power 10AMP
Medium Noise
Quick Stats
  • Suitable for flat surfaces
  • Air operated - 0.5mPa (5 bar)
  • Label width - 25 - 176mm
  • Label height - 80 - 200mm
  • Electro/pneumatic controlled
  • No tools required for setting adjustment
Features
  • Supporting air and the vacuum as well as the speed of the cylinder are adjustable. That way the applicator can be adapted to different label material and sizes.
  • The operating pressure for the cylinder is reduced in comparison to the main pressure of the applicator. So the risk of injury is reduced as far as possible.
  • To avoid contamination within the vacuum channels they are cleaned by the air pressure impulse at the end of each application.
  • For operation in a networked system the 15-pin or 25-pin applicator's PLC (programmable logic control) interface with potential free inputs and outputs can be use.
Options
  • Stamp on - The label is pressed directly onto the product
  • Blow on - The pad moves to a pre-adjusted position approximately 10mm away from the product. The label is blown onto the product by an air stream.
  • Stamp on - The label is pressed directly onto the product
More

Print Apply setups can also be achieved with an continuous ink jet coder such as the IJC-PB Ink Jet Coder, the IJC-RX Ink Jet Coder,

This machine would normally be used with
Pilot Air TM12 Portable Air Compressor

Pilot Air TM12 Portable Air Compressor

AIR COMPRESSOR SINGLE PHASE ELECTRIC PORTABLE

Read more

CV-6-B Rubber Belt Conveyor

RUBBER BELT CONVEYOR

Read more

INS-AUJR Bench Top Induction Sealer

AUTO JR SEMI-AUTOMATIC BENCH TOP INDUCTION SEALER

Read more

AC-1 Bench Model Capper

SINGLE HEAD CAP TIGHTENER

Read more

PT-7 Pumptite Unit

PUMPTITE TRIGGER PACK UNIT

Read more

AV-3 Single Head Filler

AV-3 Single Head Filler

SINGLE HEAD VOLUMETRIC LIQUID CREAM, PASTE AND OTHER WET-STATE FILLER

Read more

Shop parts & consumables

100mm x 350mtr Black Resin Thermal Transfer Ribbon – Premium (Ricoh B110C)

View Product

150mm x 350mtr Black Resin Thermal Transfer Ribbon – Premium (Ricoh B110C)

View Product

25mm x 350mtr Black Resin Thermal Transfer Ribbon

View Product

Shop Packaging & Materials
Bottles

Bottles

Visit Site

Labels

Labels

Visit Site

Caps

Caps

Visit Site

Seals

Seals

Visit Site

Copyright 2018 by Packserv Pty Ltd. All rights reserved.