The 3M-Matic Case Sealer 800a features a side belt drive and upper and lower 3M AccuGlide 3 taping heads as well as an alternative outboard mount for the lower tape roll. This results in top and bottom taping of a huge variety of box types.
A height adjustment crank raises or lowers the taping head to adjust to box height and compression rollers position the top flaps of each box for precise sealing. Dual masts include twin lead screws for stop relocation and stronger taping head stability.
The gear motors provide power to the laced side drive belts which run at 100 ft per minute. It can be quickly shut down using the centrally located emergency stop switch.
After setup, 3M-Matic Case Sealer 800a continues to feed same size boxes at a rate of 40 boxes per minute. To change box configuration, simply readjust height and width to accommodate the new case size – changeover between boxes takes mere minutes.